Power Over Ethernet (POE), Industrial Ethernet and POE Switch - Korenix USA |
 |
|
Jul. 4, 2011 - PoE Switch - Korenix USA JetNet 3810G Industrial 8 PoE + 2 Gigabit Switch with 12V Power Booster
 Korenix USA is proud to announce the World’s 1st Gigabit Booster PoE Switch - JetNet 3810G. This switch is an Industrial 8-port PoE +2 Ethernet Gigabit switch with 12~24VDC (US Patented) PoE booster technology. JetNet 3810G integrates 8 PoE ports in a single switch to best fit in large PoE connectivity requiring applications while providing easy installation and significantly reducing the costs of the total networking solution. The new PoE switch features a built-in vehicle PoE technology – the 12~24VDC to 48VDC (US Patented) power booster for allowing system integrators to deploy standard PoE-enabled devices in buses, ships, railcars and other 12~24VDC power source environments. Major features of JetNet 3810G are: Eight 10/100 TX Power over Ethernet ports plus two 10/100/1000TX uplink ports Vehicle PoE: DC 12V~24V input, deliver 8 port PoE @48V. (US Patented) 802.3af compliant PoE: Total power budget is 100W with max. 15.4W per port Two gigabit Ethernet ports for larger uplink bandwidth of surveillance Support QoS for optimizing video and VoIP stream Fault relay for active warning of port failure R***ed aluminum case with IP31 protection -25~70℃ operating temperature For more information on this and other Korenix products: Visit: www.korenix-usa.com E-mail: sales@korenix-usa.com Call: 626-964-3549 Korenix USA, based in Walnut, California, services all of North, South & Central America by providing hardened, cost-effective, and Industrial Ethernet Switches for Industrial and R***ed applications. Our award-winning flagship products JetPoE Industrial Managed PoE Switch and JetBox Industrial Embedded Computer lead the way in industrial automation, power utility, telecommunications, and outdoor markets such as traffic control and video surveillance. Korenix USA supplies the extra edge for Industrial Networking!
|
|
Permanent Link
|
Jul. 3, 2011 - Gigabit - JetNet 6524G
 Korenix USA is proud to announce the release of the JetNet 6524G Industrial 24-Port Gigabit Stackable Layer 3 Managed Ethernet Switch. The JetNet 6524G is a 19-inch Gigabit Stackable Layer 3 Managed Switch, equipped with 24 10/100/1000 Base-TX ports, including 4 Gigabit SFP combo ports delivering maximum throughput and flexibility for high-density and ultra high-speed connection. Up to 8 units can be stacked together, allowing users to simultaneously build a single-IP manageable device while providing 40G backplane across full duplex stacking links. JetNet 6524G’s flexible interface design allows it to provide up to 192 Gigabit ports per stack and 384G bandwidth for building intelligent large-scale networks. In addition to the 90-264VAC power-based JetNet 6524G model, Korenix offers the JetNet 6524GDC series, which can support 24V or 48V power inputs and features a FAN-less design with -40~65oC wide operating temperature for severe industrial applications. Easy Stack Management The simplified stack management interface of JetNet 6524G allows users to manage up to 192 ports of the switches through a single console interface or single IP address. Administrators can also benefit from the stacking interface by easily configuring the precedence of each stack member. By assigning different precedence to different stack members, users can choose the management (Master) unit of the stack. If a stack member's precedence is assigned to be disabled, this stack member will always be a slave unit. Layer 3 Routing The JetNet 6524G IP routing layer contains the IP forwarding layer, Address Resolution Protocol (ARP) mapping layer and Routing Tables. With its IP forwarding table, the JetNet 6524G provides wire speed IP and VLAN inter-routing. A single JetNet 6524G enables users to configure multiple IP subnets and assign them to the physical interface. The routing table can be updated according to the routing information defined by configured static route or learned by dynamic Routing Protocols. The dynamic Routing Protocols supported by JetNet 6524G are RIPv1, v2, OSPFv1 and V2. In addition to IP and VLAN routing, routing multicast streams such as movies, videos, and industrial automation streams through different subnets requires dynamic multicast routing protocols such as PIM-DM and PIM-SM, DVMRP and IGMP v1/v2/v3. The JetNet 6524G differs from other layer 3 switches with its multicast routing feature. With IGMP snooping and IGMP router port selection protocols, the JetNet 6524G acts as an access level switch or aggregated switch, so that the clients can be divided into different subnets for wire speed routing and for exchanging routing information with other L3 routers/switches. Key Features:
24-port 10/100/1000 BaseT ports with 4 Gigabit SFP combo ports - 2 10G backplane for stacking up to 8 units with 192 ports and 384G bandwidth
- Supports IP, VLAN & Multicast routing
- IP Routing protocol supports RIP v1 / v2, OSPF v1/v2
- Supports L3 Multicast, PIM-DM and PIM-SM, DVMRP, IGMP v1/v2/v3
- Virtual Redundant Router Protocol (VRRP) for gateway redundancy
- Supports LLDP and JetView Pro i2NMS for network auto topology visualization and efficient group management
- Multiple Super Ring member mode
- 802.1s Multiple Spanning Tree Protocol and 802.1w RSTP for network redundancy
- Supports 512 VLANs, GVRP/GMRP, protocol VLAN
- 802.3ad LACP, up to 6 trunk groups, unicast and multicast load balance
- Supports L2 / L3 / L4 ACL (access control list)
- IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port binding
- FAN-less design with -40~65oC wide operating temperature (JetNet 6524G-DC)
For more information on this and other Korenix products: Visit: www.korenix-usa.com E-mail: sales@korenix-usa.com Call: 626-964-3549 Korenix USA, based in Walnut, California, services all of North, South & Central America by providing hardened, cost-effective, and Industrial Ethernet Switches for Industrial and R***ed applications. Our award-winning flagship products JetPoE Industrial Managed PoE Switch and JetBox Industrial Embedded Computer lead the way in industrial automation, power utility, telecommunications, and outdoor markets such as traffic control and video surveillance. Korenix USA supplies the extra edge for Industrial Networking!
|
|
Permanent Link
|
Jun. 1, 2011 - Industrial Managed Ethernet Switch
The JetNet 6524G is a 19-inch Gigabit Stackable Layer 3 Industrial Managed Ethernet Switch,
equipped with 24 10/100/1000 Base-TX ports, including 4 Gigabit SFP
combo ports delivering maximum throughput and flexibility for
high-density and ultra high-speed connection. With stacking cable
installation, up to 8 units can be stacked together, allowing building a
single-IP manageable device and simultaneously providing 40G backplane
across full duplex stacking links. The flexible interface design
allows JetNet 6524G to provide up to 192 Gigabit ports per stack and
384G bandwidth for building intelligent largescale networks. In
addition to the 90-264VAC power-based JetNet 6524G model, Korenix
provides the JetNet 6524GDC series, which support 24V or 48V power
inputs and feature a FAN-less design with -40~65oC wide operating
temperature for severe industrial applications.
Easy Stack Management
The
simplified stack management interface of JetNet 6524G allows users to
manage up to 192 ports of the switches through single console interface
or remotely manage them through single IP address. Besides,
administrators can benefit from the stacking interface by easily
configuring the precedence of each stack member. By assigning different
precedence to different stack members, users can choose the management
(Master) unit of the stack. If a stack member's precedence is assigned
to be disabled,this stack member will always be a slave unit.
Layer 3 Routing
The
JetNet 6524G IP routing layer contains the IP forwarding layer, Address
Resolution Protocol (ARP) mapping layer and Routing Tables. With IP
forwarding table, the JetNet 6524G provides wire speed IP and VLAN
inter-routing. A single JetNet 6524G allows users to configure multiple
IP subnets and assign them to the physical interface. The routing
table can be updated according to the routing information defined by
configured static route or learnt by dynamic Routing Protocols. The
dynamic Routing Protocols supported by JetNet 6524G are RIPv1, v2,
OSPFv1 and V2. Aiming to route multicast streams such as movies, videos, industrial Ethernet automation
streams through different subnets, in addition to IP and VLAN routing,
the dynamic multicast routing protocols, such as PIM-DM and PIM-SM,
DVMRP , IGMP v1/v2/v3, are needed. Korenix JetNet 6524G outstands from
other layer 3 switches by its multicast routing feature. With IGMP
snooping and IGMP router port selection protocols, the JetNet 6524G
acts as an access level switch or aggregated switch, so that the
clients can be divided into different subnets for wire speed routing
and for exchanging routing information with other L3 routers/switches. Key Features:
24-port 10/100/1000 BaseT ports with 4 Gigabit SFP combo ports
- 2 10G backplane for stacking up to 8 units with 192 ports and 384G bandwidth
- Supports IP, VLAN & Multicast routing
- IP Routing protocol supports RIP v1 / v2, OSPF v1/v2
- Supports L3 Multicast, PIM-DM and PIM-SM, DVMRP, IGMP v1/v2/v3
- Virtual Redundant Router Protocol (VRRP) for gateway redundancy
- Supports LLDP and JetView Pro i2NMS for network auto topology visualization and efficient group management
- Multiple Super Ring member mode
- 802.1s Multiple Spanning Tree Protocol and 802.1w RSTP for network redundancy
- Supports 512 VLANs, GVRP/GMRP, protocol VLAN
- 802.3ad LACP, up to 6 trunk groups, unicast and multicast load balance
- Supports L2 / L3 / L4 ACL (access control list)
- IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port binding
- FAN-less design with -40~65oC wide operating temperature (JetNet 6524G-DC)
For more information on this and other Korenix products:
Visit: www.korenix-usa.com
E-mail: sales@korenix-usa.com
Call: 626-964-3549
Korenix
USA, based in Walnut, California, services all of North, South &
Central America by providing hardened, cost-effective, and Industrial
Ethernet Switches for Industrial and R***ed applications. Our
award-winning flagship products JetPoE Industrial Managed PoE Switch
and JetBox Industrial Embedded Computer lead the way in industrial
automation, power utility, telecommunications, and outdoor markets such
as traffic control and video surveillance. Korenix USA supplies the
extra edge for Industrial Networking!
|
|
Permanent Link
|
May. 12, 2011 - Virtual Redundant Router Protocol - JetNet 6524G
Korenix USA is proud to announce the release of the JetNet 6524G Industrial 24-Port Gigabit Stackable Layer 3 Managed Ethernet Switch .The JetNet 6524G is a 19-inch Gigabit Stackable Layer 3 Managed Switch, equipped with 24 10/100/1000 Base-TX ports, including 4 Gigabit SFP combo ports delivering maximum throughput and flexibility for high-density and ultra high-speed connection. Up to 8 units can be stacked together, allowing users to simultaneously build a single-IP manageable device while providing 40G backplane across full duplex stacking links. JetNet 6524G’s flexible interface design allows it to provide up to 192 Gigabit ports per stack and 384G bandwidth for building intelligent large-scale networks. In addition to the 90-264VAC power-based JetNet 6524G model, Korenix offers the JetNet 6524GDC series, which can support 24V or 48V power inputs and features a FAN-less design with -40~65oC wide operating temperature for severe industrial applications.
EasyStackManagement
The simplified stack management interface of JetNet 6524G allows users to manage up to 192 ports of the switches through a single console interface or single IP address. Administrators can also benefit from the stacking interface by easily configuring the precedence of each stack member. By assigning different precedence to different stack members, users can choose the management (Master) unit of the stack. If a stack member's precedence is assigned to be disabled, this stack member will always be a slave unit.
Layer 3 Routing
The JetNet 6524G IP routing layer contains the IP forwarding layer, Address Resolution Protocol (ARP) mapping layer and Routing Tables. With its IP forwarding table, the JetNet 6524G provides wire speed IP and VLAN inter-routing. A single JetNet 6524G enables users to configure multiple IP subnets and assign them to the physical interface. The routing table can be updated according to the routing information defined by configured static route or learned by dynamic Routing Protocols. The dynamic Routing Protocols supported by JetNet 6524G are RIPv1, v2, OSPFv1 and V2.
In addition to IP and VLAN routing, routing multicast streams such as movies, videos, and industrial automation streams through different subnets requires dynamic multicast routing protocols such as PIM-DM and PIM-SM, DVMRP and IGMP v1/v2/v3. The JetNet 6524G differs from other layer 3 switches with its multicast routing feature. With IGMP snooping and IGMP router port selection protocols, the JetNet 6524G acts as an access level switch or aggregated switch, so that the clients can be divided into different subnets for wire speed routing and for exchanging routing information with other L3 routers/switches.
KeyFeatures:
24-port 10/100/1000 BaseT ports with 4 Gigabit SFP combo ports
- 2 10G backplane for stacking up to 8 units with 192 ports and 384G bandwidth
- Supports IP, VLAN & Multicast routing
- IP Routing protocol supports RIP v1 / v2, OSPF v1/v2
- Supports L3 Multicast, PIM-DM and PIM-SM, DVMRP, IGMP v1/v2/v3
- Supports LLDP and JetView Pro i2NMS for network auto topology visualization and efficient group management
- Multiple Super Ring member mode
- 802.1s Multiple Spanning Tree Protocol and 802.1w RSTP for network redundancy
- Supports 512 VLANs, GVRP/GMRP, protocol VLAN
- 802.3ad LACP, up to 6 trunk groups,unicast and multicast load balance
- Supports L2 / L3 / L4 ACL (access control list)
- IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port binding
- FAN-less design with -40~65oC wide operating temperature (JetNet 6524G-DC)
For more information on this and other Korenix products:
Visit: www.korenix-usa.com
E-mail: sales@korenix-usa.com
Call: 626-964-3549 Korenix USA, based in Walnut, California, services all of North, South & Central America by providing hardened, cost-effective, and Industrial Ethernet Switches for Industrial and R***ed applications. Our award-winning flagship products JetPoE Industrial Managed PoE Switch and JetBox Industrial Embedded Computer lead the way in industrial automation, power utility, telecommunications, and outdoor markets such as traffic control and video surveillance. Korenix USA supplies the extra edge for Industrial Networking!
|
|
Permanent Link
|
|
About Me
Power over ethernet (POE) used for Industrial communications and networking products,industrial control, data communications and industrial networking applications. Industrial ethernet, POE switch manufacturing to any tailor-made products and services available at Korenix USA. if u visit our site http://www.korenix-usa.com.
Links
• Home
• View my profile
• Archives
• Email Me
|
|
Find Other Friends
|
|
